- Xfx radeon hd 6850 double dissipation 1gb ddr5 hd 685x zdfc full#
- Xfx radeon hd 6850 double dissipation 1gb ddr5 hd 685x zdfc tv#
I use a full boot to detect, no problems with Optimus and no need to delay eGPU powerup.
Xfx radeon hd 6850 double dissipation 1gb ddr5 hd 685x zdfc tv#
Display: FullHD Samsung TV through HDMI or internal x220 display (1366x768 ) GPU: Gainward GTX570 Golden Sample - default clock Lenovo X220 s i5-2520, 4GB RAM, 80GB Intel SSD mSATA + oem 320GB HDD, Win 7 64bit Prof OEM, BIOS 1.29 default settings PE4L 2.1b with default 60cm cable, set to SW1: 2 and SW2: 2-3 (setting SW2 on position 2-3 would make the 3rd LED orangish wether the eGPU is plugged or not.)Īnd yes my GPU is looking weird, fans were dead so I've used standard 120mm fansįirst thanks to all nando4 and all the guys helping to develop this. Here is a picture of the powered and plugged eGPU, only the first LED is lit. But I cannot do it anyone on the PM3N like addapter Hypothesis : could the problem be from the CLKRUN signal being started before the GPU is attached ? Because as I said, to get my 1.1opt eGPU setup working I had to hotplug the PM3N, SW1 set on position 1 only. Well I do not understand every terms, I'm sorry for not giving you a more accurate description of my problem. On the mPCI-e adapter of the PE4L 2.1b, there's no SW1 (I think it's on the PE4L itself) maybe that's the problem ? since with the PM3N it wouldn't work on position 2-3 (7-15s delay) But that didn't even make it crashes with the PE4L 2.1b :/ Once the eGPU is detected, I used to set gen1 speed and run a 32bits PCI compaction.īut with the new PE4L 2.1b it didn't help.Īlso, with the PE4H + PM3N, if I power it before bios loading, the laptop would crashes. With my first setup (PE4H 2.4a + PM3N) PM3N and PE4H SW1 were both set on position 1, other setting would make the Z chrashes or the eGPU not found. (by the way, what is a cold and warm boot?)
I've tried many combinaison with the PE4L's SW1 & SW2, hotplugging etc. I couldn't not even get the eGPU detected. The eGPU is plugged on the wifi port, which is the port 1.Īfter more than 15 try. So the laptop I've used, is a VAIO VPC-Z2 (HM67)
I decided to unleash its potential with the newly released PE4L 2.1b PM060A which has a mPCIe plug.
0 kommentar(er)
